Topic: Bot Video
started by: Wolfguard
< http://robotconflict.com/clips/preview.mpg >
Its about 8meg so make sure you have the time.
Enjoy.
------------------
Fucknuggets flamed while you wait.< TeamWolfguard.com >
< Robot Conflict >
12lb ers? i thought that combat robots were like 100+ lbs. shows how much i know.
------------------
Fellow Gimpians, We must band together! The Darkside must not be allowed to infiltrate our ranks. For security reasons, The following instructions have been written in Wookie:
Arrgh aaaaaagh ooooooooh ooooooooh yawwwwwwgh woooo yaaawwwwgh!
The world is ours!!
Im working on better angles. That was just a mix from the first tape i was able to get into the pc. I posted for the people of the NERC that would not leave me alone and thought i would share it here too.
------------------
Fucknuggets flamed while you wait.< TeamWolfguard.com >
< Robot Conflict >
i welded a screw driver (with my hot glue gun
) on the front of my remote control car. then i added a little row of nails on this little strip of metal. and for finishers, theres a snall ball-pin hammer attached to the back.it scares the hell of out the nieghbor's cats. and my dog.
------------------
...when you look long into an abyss, the abyss also looks into you
-- Friedrich Nietzsche
quote:
Originally posted by Rhydant:
ball-pin hammer
Funny as it sounds, the phrase you were looking for was ballpeen hammer. (Though I'm not completely sure of the hyphenation.)
*edit* I also just found this:
quote:
Main Entry: peen
Pronunciation: 'pEn
Function: transitive verb
Date: 1513
: to draw, bend, or flatten by or as if by hammering with a peen
[neo]So, you wanna touch my peen?[/neo]
------------------
When 1337 hax0rs start impaling each other with swords and typing code with a hook on one hand, then they can modify the term "pirate."
This message has been edited by Observer on May 08, 2001 at 07:53 AM
quote:
Originally posted by Rhydant:
i welded a screw driver (with my hot glue gun
Um....if you used your hot glue gun.....its not welding...
------------------
Decaffinated coffee is like unleaded fuel, it tastes like shit.
i dont have access to a blow otrch or any welding device of any kind.
jesus christ, youre lame!
------------------
...when you look long into an abyss, the abyss also looks into you
-- Friedrich Nietzsche
------------------
.:< JB >:.
quote:
Originally posted by Rhydant:
i dont have access to a blow otrch or any welding device of any kind.
jesus christ, youre lame!
umm....If you dont have access wouldnt that make you lame.
i have access to an acetylene torch, a mig welder, a tig welder, brasing torch, and have the knoledge to use them.....
------------------
Decaffinated coffee is like unleaded fuel, it tastes like shit.
Do you know how to use them right?
------------------
Fucknuggets flamed while you wait.< TeamWolfguard.com >
< Robot Conflict >
quote:
Originally posted by Wolfguard:
Anyone can make crapDo you know how to use them right?
I can make a nice bead, and I can cut a pretty good outline. I have a little trouble with the tig. Its hard to keep the gas flooded sometimes... granted im usually outdoors when im doint it.(various frame supports and connectors, body mounts and such) Ive take 2 classes and have a really good basis on the shit. Last summer I built most of a square tubular front steering and suspension assembly for a friends mustang. It was light as shit but we had to do most of the TIGing indoors and then take it outside in 3 big pieces to put it on his car. We put mc pherson struts on instead of an A-arm assemble and the car handled SO much better.
------------------
Decaffinated coffee is like unleaded fuel, it tastes like shit.